24V DC 6/4mm Solenoid Valve CO2 Aquarium
Notice: This product is discontinued
This 24V DC solenoid valve is ideal for automatic dosing of CO2 to your aquarium. The valve can be controlled by for example a timer or pH dispenser. Including fittings to connect a 6/4mm CO2 hose.
Notice: This product is discontinued
Description
This solenoid valve is ideal to dispense CO2 to your aquarium automatically. The valve is suitable for a 24V DC power supply. The valve can be controlled by a pH controller or a timer, so that the supply of CO2 can be stopped at night.
The valve can be easily installed between a standard 6mm hose using the included push-on fittings. This quality product from JP Fluid Control is characterized by a durable brass construction and an energy consumption of 6W. Are you looking for a different hose connection? Hose tails, push-in fittings and other fittings can be found in the Related Products section or in our range of fittings.
Main features
- Ideal for automated CO2 dosage for aquariums
- Suitable for 24V DC
- Suitable for plastic hoses with 6mm outer diameter and 4 mm inner diameter
- Easy to install with the included push-on fittings
- Long service life thanks to the high quality components
Installation Tips
- Don't energize the coil when it's not mounted to the valve, it may burn out.
- Make sure that no dirt can get into the valve, solenoid valves are particularly sensitive to dirt.
- Make sure the gas flows from port 1/IN to port 2/OUT.
Technical specifications
Parameter | Value |
---|---|
Hose connection | 6/4 mm (outer/inner diameter) |
Voltage | 24V DC power supply |
Power | 6W |
Duty Cycle | 100% ED (suitable for continuous use) |
Housing | Brass |
Orifice | 2 mm |
Seal | FKM |
Maximum pressure | 10 bar |
Connector | DIN - B |
Kv value | 0.11m3/h |
Standard included
- Solenoid valve (CM-DA018B020F)
- Coil including DIN connector (CS4-024DC)
- 2x Push-on Fitting G1/4" x 6/4mm (F27X9)