To water Flax, you can use a garden hose with a spray nozzle, a watering can, or just about any other common watering tool. Generally, Flax is not too picky about how they receive their water, as they can live off of rainwater, tap water, or filtered water. Often, you should try not to water this plant from overhead, as doing so can damage the leaves and flowers and may lead to disease as well. At times, the best method for watering this plant is to set up a drip irrigation system. These systems work well for Flax as they apply water evenly and directly to the soil. For one Flax that grows in a container, you can use a similar watering approach while changing the tools you use. To water a container-grown Flax, use a cup, watering can, or your tap to apply water directly to the soil.

The remedy for underwatering Flax is somewhat obvious. When you notice that your plant lacks moisture, simply begin watering it on a more regular basis. The issue of overwatering can be a much more dire situation, especially if you fail to notice it early. When your Flax is overwatered, it may contract diseases that lead to its decline and death. The best way to prevent this outcome is to choose a proper growing location, one that receives plenty of sunlight to help dry the soil and has good enough drainage to allow excess water to drain rather than pooling and causing waterlogged soils. If you overwater your Flax that lives in a pot, you may need to consider changing it to a new pot. Your previous container may not have contained soil with good drainage or may not have had sufficient drainage holes. As you repot your overwatered Flax, make sure to add loose soils and to use a pot that drains efficiently.

Flax needs water regularly throughout the growing season. Beginning in spring, you should plan to water this plant about once per week. As the season presses on and grows warmer, you may need to increase your watering rate to about two to three times per week. Exceeding at this rate can be detrimental to your Flax. With that said, you should also ensure that the soil in which your Flax grows remains relatively moist but not wet, regardless of how often you must water to make that the case. Watering Flax that lives in a pot is a bit different. Generally, you'll need to increase your watering frequency, as the soil in a pot can heat up and dry out a bit faster than ground soil. As such, you should plan to water a container-grown Flax a few times per week in most cases, versus just once per week for an in-ground plant.

There are a few different ways you can go about determining how much water to give to your Flax. Some gardeners choose to pick their water volume based on feeling the soil for moisture. That method suggests that you should water until you feel that the first six inches of soil have become moist. Alternatively, you can use a set measurement to determine how much to water your Flax. Typically, you should give your Flax about two gallons of water per week, depending on how hot it is and how quickly the soil becomes dry. However, following strict guidelines like that can lead to overwatering if your plant requires less than two gallons per week for whatever reason. When growing Flax in a container, you will need to use a different method to determine how much water to supply. Typically, you should give enough water to moisten all of the layers of soil that have become dry. To test if that is the case, you can simply stick your finger in the soil to feel for moisture. You can also water the soil until you notice a slight trickle of excess water exiting the drainage holes of your pot.

It can be somewhat difficult to avoid overwatering your Flax. On the one hand, these plants have relatively deep roots that require you to moisten the soil weekly. On the other hand, Flax are plants that are incredibly susceptible to root rot. Along with root rot, your Flax may also experience browning as a result of overwatering. Underwatering is far less likely for your Flax as these plants can survive for a while in the absence of supplemental watering. However, if you go too long without giving this plant water, it will likely begin to wilt. You may also notice dry leaves.

You can expect your Flax’s water needs to increase as the season moves on. During spring, you should water about once per week. Then, as the summer heat arrives, you will likely need to give a bit more water to your Flax, at times increasing to about three times per week. This is especially true of Flax that grow in containers, as the soil in a container is far more likely to dry out faster than ground soil when the weather is warm. In autumn, while your Flax is still in bloom, it may need a bit less water as the temperature has likely declined, and the sun is no longer as strong as it was in summer.

Flax will move through several different growth stages throughout the year, some of which may require more water than others. For example, you will probably start your Flax as a seed. While the seed germinates, you should plant to give more water than your Flax will need later in life, watering often enough to maintain consistent soil moisture. After a few weeks, your Flax will grow above the soil and may need slightly less water than at the seedling phase. Then, once this plant is mature, you can begin to use the regular watering frequency of about once per week. As flower development takes place, you may need to give slightly more water to aid the process.

There are several reasons why most Flax grow outdoors rather than indoors. The first is that these plants typically grow to tall. The second reason is that Flax needs more daily sunlight than most indoor growing locations can provide. If you are able to provide a suitable indoor growing location, you may find that you need to give your Flax water a bit more often than you would in an outdoor growing location. Part of the reason for this is that indoor growing locations tend to be a lot drier than outdoor ones due to HVAC units. The other reason for this is that soil in containers can dry out relatively quickly as well compared to soil in the ground.

Flax is a kind of annual plant so it doesn't need much pruning. You only need to cut off and clean the diseased, yellow or dropped leaves and stems during its growing period. This will help your Flax to stay away from pathogens infection.

During the growth of the plant, yellowing, drying and spotted leaves are produced, and these spotted and discolored leaves need to be trimmed off. If the whole piece of leave is discolored or infected, you will need to cut it off completely. In other situations, you will only need to cut off the discolored or infected part on certain leaves. Flax above the ground will die and dry up in the winter, and the dead plants need to be cleaned up.

Flax leaves are delicate, so take care not to score or bruise them. Unless the leaves are withered or heavily discolored, do not prune the leaves from the lowermost branches unless they’re damaged. They typically grow the largest, so they supply the plant with critical energy to keep it growing right. Please prevent the wounds from water after pruning until they are fully recovered. Remember always sterilize the tools before pruning. When the pruning is finished, please throw all the waste leaves and stems into the trashbins to avoid diseases and bugs.

Sterilize all the tools before pruning; unclean tools will pass pathogens to the plant through wounds; Prune on sunny days because the new cuts will be infected by pathogens if they're distained by rain or water. Throw all the waste leaves and stems into trashbins, they will easily rot and attract diseases and bugs

Expect to prune your Flax every week if it’s growing well or every two weeks if it grows slowly. It is always good to prune it on sunny days because if you prune it on rainy days, the rainwater will distain the cuts and cause the whole plant to be infected.

Because Flax is an annual plant, the pruning should take place basically during the seasons that the plant grows rapidly. During the growth of the plant, yellowing, drying and spotted leaves are produced, and these spotted and discolored leaves need to be trimmed off.

You must expose the plants to at least 6 to 8 hours of sunlight daily. They prefer more exposure to the morning light, especially in the summer. The Flax needs full sun and more sunlight that it can get. The more light these species get, the more they can manufacture food, produce beautiful blooms, and survive.

The Flax grows best under full sunlight. It's best not to crowd them together so they can get exposure to the sun evenly. The leaves shouldn't be starved with sunlight. If planted in pots, try to expose the herbaceous flowers in windows with direct sun and ensure they receive full sunlight regardless of the months. They don't tend to do well in partial or filtered light as this will not produce strong stems and healthy flowers. It's best if the Flax is always exposed to the sun.

When the temperature rises above 90℉(32℃), the Flax can get damaged by extreme temperatures, especially if they are exposed to many hours of sun. It's always ideal for providing some shade from the light in the afternoon in the summer. It's always important to keep in mind that the sunlight in the summer is stronger than the one in the winter. Sunlight exposure is also 50% longer in the summer than in the winter. If the Flax is too stressed with sunlight, you might want to keep them fully hydrated. Water them when the top of the soil is about 2 inches dry, and move the plants indoors if it's too hot outside. This is the case if they are planted in containers. It can be normal for the plant leaves to wilt during the day. Generally, they can recover at night. However, when you notice that the Flax is still drooping, this means that the plant is losing water fast, and you need to water them.

The Flax does not need any protection from the sun. In fact, they love the sun, and some species are heliotropic. Plant them in south-facing gardens whenever possible so they can be exposed from morning to afternoon. While the sun can benefit them, some may experience a sunburn. You might offer protection from the afternoon and midday sun through a shade of a tree or a wall. Growing the Flax in shady areas is impossible because the larger flowers would require a lot of energy to grow and produce. Always provide the lighting conditions and set them in an area with full sun for best results.

When the Flax does not get adequate sunlight, or they are not placed in full sun locations, it's worth noting that the photosynthetic process will slow down. A lack of sunlight will cause the stems to become more leggy since they become thin and long since they tend to seek too much sunlight. They will not bloom and produce seeds in the shade. Inadequate sunlight will also mean that the older leaves can die, the color of the new ones is lighter than the old foliage, and the new growth is smaller than the last ones. The Flax indeed loves the sun so much. However, they can wilt when exposed to excessive heat and ultraviolet light during the extreme summer months, so be careful. You might want to cover them with a net that has a green shade, especially in the summer, to prevent the leaves and the flowers from scorching. When they are indoors, reduce the heat with the help of a fan.

When the Flax is growing, they need more light than their mature counterparts. The younger ones should receive adequate light, but they might not be prepared for sudden full sunlight, especially if they are grown in a nursery. They can be more sensitive to the summer sun, so the lighting should be gradual and slow.

During summer or late spring, the Flax needs 6 to 8 hours of direct light every single day. This is whether they are planted outdoors. If the Flax is planted in pots or you're growing them in the winter, they need direct fluorescent lights that help them grow better. Make sure to place them in an indoor area where they are facing south or east so they can have enough sunlight for photosynthesis.

When transplanting the plants, they should not be exposed to sudden sunlight. Give the Flax to grow and mature before transplanting outside. Some species of herbaceous plants can grow taller and might cast a shade on other young plants. Allow between 80 to 100 days of growing season before planting another batch to ensure that every plant receives more than enough sunlight for at least 6 hours a day. Make sure that the Flax receives the best light possible, especially if it's planted in a nursery. These are sun-loving plants, but too much sunlight with a very hot temperature is also detrimental to their growth. Indoor lights should be replaced with natural sunlight as much as possible since these species crave this every day.

The best temperature for Flax depends on the time of year. There are two primary seasons to discuss for temperature: the growing season, and the dormancy season. During the growing season, once Flax has begun to sprout, the ideal temperature range should be anywhere from 65~80℉(18~27℃). Any colder than 15℉(-10℃), and the plant will suffer; its leaves may brown and wilt, but if this is a short cold snap, then Flax may be able to survive with some help. During the warmer parts of the year, Flax will need to be similarly protected from temperatures that are too high. 95-105℉ (35-40℃) is the top of this plant’s temperature range, and anything above that will compromise the integrity of the foliage and blooms of Flax. Hotter temperatures can cause wilting, drooping, and even sunburn on the leaves, which can be difficult for Flax to recover from. There are quite a few ways to combat this issue that are quick and easy!

If this is the first year of your Flax outside as a new plant, then it may need a little extra tending during the coldest months of the year. Not only can frost more severely damage a first-year Flax, but it can also prevent it from growing back as a healthy plant come spring. This plant needs to be kept at 40℉(5℃) or above when they’re not yet established, which can be done either by bringing your Flax inside for a month or two, or putting up mulch or fabric barriers that protect from frost damage. It’s also a good idea to plant Flax in a shadier spot during the first year or two, as smaller and weaker plants have a more difficult time maintaining their own temperatures in the heat. First-year Flax should receive no more than five hours of direct sunlight per day, particularly if the ambient daytime temperature gets above 80℉(27℃). Shadecloth and frequent watering or misting are the keys to summer heat control.

If cold temperatures (below 15℉(-10℃)) do occur during the growing season, there are a few measures you can take to help protect Flax from frost or cold damage. If you’re growing Flax in a container, then the container can simply be brought inside in bright, indirect light until the temperatures rise up over the lower threshold again. Another option that’s better suited for ground-planted Flax is to use mulch or horticultural fabric to create an insulated barrier around the plant, which will protect the plant from frost and cold wind. For temperatures that are hotter than 80℉(27℃) in the shade during the day, be careful to only expose Flax to six hours or less of sunlight per day, preferably in the morning hours. Putting up shade cloth, or a fine plastic mesh, can help reduce the amount of direct sunlight that hits the plant during the hottest parts of the day. You can also install a misting system that allows for a slow release of cooling mist around the base of the plant during the day to lower ground temperatures.

During the cold winter months, Flax needs a certain measure of cold in order to stay in dormancy until it’s time to sprout. Sprouting too early, that is before the danger of the last frost has passed, can be fatal to Flax, especially if it’s already had a head start when the frost hits. Winter temperatures should ideally stay below 32℉(0℃), but if they get up to 40℉(5℃), everything will be just fine. An unexpected warm spell during the cold months, which can happen in more temperate climates like woodland rainforests, can trigger a premature sprout from Flax. In this case, if there’s still imminent danger of frost, you may want to try covering it with clear plastic on stakes so that the cold has less of a chance of damaging the new sprout. This setup can be removed when the danger of frost has passed. Occasionally, Flax will be able to resprout at the correct time without any help, but this method increases the chances of a successful second sprouting.

Plants need nutrients to survive; most gardeners, regardless of experience, are well aware of this factor. However, without food, Flax will die out soon after the first pollination. Therefore, providing the right type of nutrients in the right amounts is the best way to keep Flax going throughout the blooming season and producing large, beautiful flowers. Fertilizer also helps Flax build a large, healthy root system. This plant needs all the help it can get since its root system is very thin and easily damaged. Fertilizing at planting helps Flax build a solid root structure that not only provides stability to the plant, but also sets the stage for a sensational flowering performance. When timed correctly, fertilization can greatly extend Flax's flowering period.

Flax puts on tremendous growth early in the growing season, once the danger of the last frost has passed. It’s during this time that Flax should be fertilized; more specifically, during planting. The idea is to apply when the plant is first planted in the ground or in planters; however you choose to plant it. This will be the only dose of fertilizer until later in the year, when blooms are in full force. Once the season is in full swing and Flax has opened most of its blooms at full size, it’s time to start fertilizing again. Around the time when blooms are at peak output, begin fertilizing again once every three to four weeks, as weather permits. Then, after Flax starts to put out fewer new blooms, stop fertilizing; there’s no need to fertilize when the plant can’t produce any more blooms.

While regular fertilizing is important for Flax, it absolutely can be applied at the wrong time. Some situations call for holding back the fertilizer once in a while. These are usually climate related, but they also include a variety of controllable factors. Essentially, when something is wrong with the plant, the soil, or the climate, wait it out until things have been smoothed over and the plant has recovered. An example of when not to fertilize is if there are severe or unexpected changes in the weather. If a cold nap suddenly comes in the middle of summer, wait until it’s warm again to start fertilizing. The same stands for if the soil becomes too dry or too packed to absorb anything. At this point, fertilizer will be going straight to the roots, rather than being diffused by soil before it reaches them. As you can imagine, the roots of Flax aren’t very fond of that. When temperatures soar during the hottest parts of the day into the 90-degree fahrenheit range, don’t apply fertilizer. Since fertilizer can be broken down at various speeds depending on temperature, it’s especially important not to allow hot temperatures to break it down too quickly. Pests or diseases should also be treated and cleared up before re-fertilizing.

Most types of Flax need the same general balance of nutrients from fertilizer. These should come in the form of a fertilizer that’s formulated specifically for high-yield blooming plants. A fertilizer with a higher level of phosphorus is the best option. This type of fertilizer has a higher P number in its NPK number, for example 10-30-10. Several fertilizer brands sell a fertilizer that’s perfect for blooming plants like Flax, which are an easy and fuss-free way to provide the right nutrients. If you do choose to use a pre-mixed fertilizer, follow the directions on the package to prevent Flax from getting too much or too little fertilizer, both of which can cause the plant to grow poorly or even wilt entirely.

Depending on the type of fertilizer you have, specific fertilizing instructions may vary. However, there are a few general tips for applying most types of fertilizer to Flax. The first fertilizer application, which should be when you first plant Flax, will likely consist of mixing the recommended amount of fertilizer into the soil before planting and watering in the Flax. Subsequent fertilizing may look a little different. For pellet fertilizers, simply mix the pellets into the top inch of soil around the outer edge of the plant, where the roots are. Water them in very well at first, then water regularly after that. Other fertilizers may be mixed into a watering can and applied just like a regular watering. Follow any instructions on fertilizer packaging for consistency, but if you’d rather keep things on a regular schedule, shoot for every three to four weeks.

Over-fertilizing is a very easy mistake to make for first-time gardeners, or even for experienced gardeners trying out a new product. Fortunately, Flax makes this issue known very well by displaying several signs of distress. You may notice that its leaves are yellowing quickly, the foliage may wilt, or new blooms may be under-developed. These are all clear signs of too much food. When you fertilize Flax too frequently, you create uninhabitable soil conditions. Soil may become too hot, which is a term used to describe when soil is too saturated with minerals, nutrients, or compost, and ends up burning the roots of anything planted in it. It’s a good idea to flush out the soil well once a month or so, just by watering twice as much as normal with good drainage.