filter sock holder 3d models
352140 3d models found related to filter sock holder.cults3d
Free standing filter sock holder for 4 inch socks 9 inch maximum length. Print at close to 100% fill to prevent floating. ... Gravel or rocks can be placed in lower portion to prevent floating.
thingiverse
This is a simple 4" filter sock holder for use clipping onto the side of a sump tank. ... The dimension of the insert means it will fit sumps with glass under 9mm thick.
cults3d
4 inch filter sock holder for aquarium sump. Fits on standard tank flanges Use stainless steel m3 bolts to assemble and also use CA glue. Best to use PETG or ABS. ... PLA will work, but may weaken over several years.
thingiverse
More of my projects on: - https://www.prusaprinters.org/social/46673-paragon/prints Hi, to download Filter Sock Holder 105mm Glas Mount for 5mm, 6mm, 8mm, 10mm glass, I use nylon 105mm x 380mm and recommend this seller has a variety of mesh...
prusaprinters
Hi, to download Filter Sock Holder 105mm Glas Mount for 5mm, 6mm, 8mm, 10mm glass, I use nylon 105mm x 380mm and recommend this seller has a variety of mesh thicknesses:http://s.click.aliexpress.com/e/bOI7eRykFilter Sock Holder is my production from...
thingiverse
4 inch filter holder with overflow meant to hang on baffle after crash box on the sump. ...designed to direct the water through the sock and let the water overflow when the socks become dirty
thingiverse
PS: I used this with a reef diaper filter sock because I hate cleaning filter socks, and because the adapter has a nice rubberized ring amount the outside that creates a tight seal between the sock and sock holder so water can't escape around it. ...
thingiverse
It's a holder for the 4" BRS filter socks, that will glide onto 3/4" plumbing and filter the water as it circulates. [img]https://i.imgur.com/sGlVY4yl.jpg[/img] [img]https://i.imgur.com/ArAWy2Rl.jpg[/img] [img]https://i.imgur.com/VlWAzaCl.jpg[/img]...
myminifactory
here is a desgin i made for my sump to fit two 4inch filter socks, will fit upto 7.5mm glass and is 26cm long **** MUST PRINT A AQUARIUM SAFE PLASTIC****
thingiverse
I have had trouble with other prints breaking. ...I have made some modifications and added supports at the weak point.
thingiverse
Holder for 4-inch filter socks for reef aquariums. ... Prints in3 pieces and bolts together, but I recommend bolting with nylon bolts and gluing.
thingiverse
4" filter sock stand for JBJ RL Series tanks. 170mm posts for RL-20... if you have a larger tank, please drop me a line and I'll update the desc! I created the funnel after seeing the water going out the sides/corners. While this wont get 10%...
thingiverse
So far this seems to be working fine. If you need any refinements, please let me know what tank it's for, so I can label it properly. This should fit any standard rimmed tank though. ... Thanks for checking it out.
thingiverse
So far this seems to be working fine. If you need any refinements, please let me know what tank it's for, so I can label it properly. This should fit any standard rimmed tank though. ... Thanks for checking it out.
prusaprinters
dual 4" filter sock holder 2 with overflow and with out overflowfirst one is without overflowsecond one is with overflowdesigned to hang on sump tank
thingiverse
My brother needed a mount for his 4" filter sock for his aquarium. I whipped this up and it seems to be working for him. Designed to hold a 4" pre-filter sock. I included two sets of holes that accept 1/4x20 screws to mount it to the side of your...
thingiverse
This is a basic filter sock holder. Easily printable. ... PS: If you like my designs, please consider tipping me :)
thingiverse
You can see the filter sock holder in action here (https://www.youtube.com/watch?v=uEr1m_Lz47Y). Sock Sizes: 4"x14" 100micron - (https://amzn.to/2Dz3Drg) Recomended for my water flow. See video.. 4"x14" 200micron - (https://amzn.to/2J52Cuu) If...
thingiverse
This is a filter sock holder for a RedSea Reefer 170. The hole is slightly larger for a aftermarket 4in sock. This leaves just a little room on each side and can get thin, there is not much to work with, the socks I have fit but snugly. Print in reef...
thingiverse
This is an aquarium filter sock ring for DIY sock as described on reef2reef.com https://www.reef2reef.com/threads/diy-filter-socks.162584/post-7855914
thingiverse
This item replaces your filter sock filter in your tank. You can use it with filter floss or other filter pads. ... I made this for a 2.75 inch hole but if you have a smaller or bigger one, just measure the whole and scale it is as big as you need.
cults3d
Filter of descent to sump for sock of 10 cm diameter. It measures 18 cm high and can be hung on the 6mm thick sump glass. The water falls into a compartment and then passes where the sock is. It is in two parts designed ****ACTUALIZACIONV2**. ...I have...
thingiverse
Edit it online https://www.tinkercad.com/things/acAAOlSAavV If you don't mind sewing the filter sock media on the filter ring, It saves me a ton of money. ...Just simply print out this ring and grab a needle and thread, holes already around ring just...
thingiverse
I created this to stop the noise from the water dropping into the second filter sock on my Waterbox 100.3 aquarium. It works really well. I printed with a high infill to make sure it didn't float, but given it is only 2mm thick that probably...
thingiverse
This is just a filter sock holder for buckets when doing water changes. ...it holds the pipe in place to prevent floods and accidents.
cults3d
This is a organizer for no show socks. ...Just wrap them on it just like how they are bought.
thingiverse
This is a organizer for no show socks. ...Just wrap them on it just like how they are bought.